So, you are an awesome Administrator, Developer, Consultant or Architect and you have your Scratch org, Developer Sandbox or Developer edition org ready for development, testing, training or a demo. But your org doesn’t have any data ☹, or it doesn’t have the data you want. What can you do? Well, you have the following options:
- Use an ETL tool to move data from another org or get data from CSV files.
- Use Salesforce CLI (Command Line Interface) using the commands
sfdx force:data:tree:importto export data from another org and import data in JSON format.
- Develop a custom solution (using Apex) to insert the records you need programmatically.
- Use a Data Factory to insert the required data.
The first (ETL) and second (CLI) solutions don’t need development skills, they may not be very difficult to configure (using CLI should be easier), and they let you populate your org with a specific set of records – if you really want this. The problem is that data requirements change very fast and if you have to continuously create manually the records you need in one org and then copy them to your org, this process will eventually be slow and time-consuming.
The third (Apex) solution gives you the maximum flexibility, but it’s time-consuming as well, not to mention the high level of technical knowledge it requires.
Now let’s see the fourth solution, the Data Factory. Using a Data Factory, you won’t have to write complex code or have advanced knowledge of an ETL tool. You’ll be able to easily generate and insert the records you need for any SObject and easily modify the process to adopt any new data requirements. Sounds interesting?
Stay with me as we’re going to implement such a data population project using Forceea data factory framework – this framework is an open source GitHub project.
Keep in mind that the framework is perfect for a developer who wants to create records for the test methods, but that’s another story. In this step-by-step guide we’ll assume that you have no programming knowledge! (you may be even a power Salesforce user).
Ready to start? (take a deep breath…)
Step 0: Prerequisites – Prepare your org
- For Classic orgs: You have created a Sandbox or a Developer org.
- For Salesforce DX Scratch orgs: you have created your scratch org.
For both Classic and DX, after the org creation you should have deployed your project’s metadata and set your org ready for the final data population.
Step 1: Install the Salesforce CLI
If you haven’t installed the Salesforce CLI, go to https://developer.salesforce.com/tools/sfdxcli, download the CLI for your system and install it. Accept the default settings and after a while your Salesforce CLI will be ready to run.
Step 2: Authorize your org
To use CLI, you need to authorize your org. To do this, open the Command Prompt window and execute the following command
sfdx force:auth:web:login -r https://login.salesforce.com -a OrgAlias Some comments here:
- If you’re authorizing a sandbox, the instance URL will be https://test.salesforce.com.
- You should replace OrgAlias with the alias of your org (choose one, e.g. sf1).
To verify that everything is fine, log into your org using the command
sfdx force:org:open -u OrgAlias
Step 3: Install Forceea
There are two ways to install Forceea.
Method 1: Deploy to Salesforce button
Go to https://github.com/nmitrakis/Forceea and click the button
If the “Deploy to Salesforce” tool doesn’t work (returns an OAuth error), you can install the unmanaged package 18.2)
Then you’ll be re-directed to the page
- If you install in a sandbox, select Deploy to: Sandbox. Otherwise, accept the default selection (Production/Developer).
- Click the Login to Salesforce button (on the right corner) and give your credentials.
- Then click Allow to give the tool the access to your org. You are redirected to a new page where the From GitHub Repository section lists the details of Forceea URL and the To Salesforce Org section the details of the target org. Click the Deploy button (on the right corner).
- After a few seconds you’ll see the message Deployment Complete at the bottom of your page.
Method 2: Deploy with ant or CLI
Go to the GitHub repository https://github.com/nmitrakis/Forceea and click Clone or Download.
Click Download ZIP. After a few seconds the Forceea-master.zip will have been downloaded. Unzip the zip file and you will find the metadata folder, which contains
- the src folder, with a folder with each metadata component and the package.xml
- the dx folder, with the Salesforce DX components
- a build.properties file
- a build.xml file
The easiest way to regularly use Forceea is to include its metadata into your Repository (either classic or DX metadata). Then you can deploy it with your project’s metadata.
Step 4: Create the Forceea scripts
What are Forceea scripts?
Forceea uses Dadela, a data generation language, to describe the “nature” of the required data. A script is a set of commands. Let’s see an example, which creates and inserts opportunities:
FObject obj = new FObject('Opportunity', 100);
obj.setDefinition('Name', 'static value(Opp-)');
obj.setDefinition('Name', 'serial type(number) from(1) step(1) scale(0)');
obj.setDefinition('AccountId', 'random lookup(Account) field(Industry) value(Chemicals,Construction) source(salesforce)');
obj.setDefinition('Amount', 'random type(number) from(1000000) to(10000000) scale(-3)');
obj.setDefinition('StageName', 'random type(picklist)');
obj.setDefinition('CloseDate', 'random type(date) from(2017-01-01) to(2017-12-31)');
obj.setDefinition('Forceea__c', 'static value(xJio9!23)'); // ** create this field **
If the above commands look like Apex statements, you’re right, they are Apex statements, but you may forget it for the moment! The above script will insert 100 Opportunity records with:
- Name: Opp-1, Opp-2, .., Opp-100
- Account: any account for which the Industry is “Chemicals” or “Construction”
- Amount: a random integer from 1M to 10M, round to 1000 (e.g. 9,252,000)
- Stage: any picklist value
- Close date: any date from 1 Jan. 2017 to 31 Dec. 2017
A field definition begins with
setDefinition and has two text parameters:
- The field API name, e.g. Amount or AccountId
- The Dadela definition, e.g.
random type(number) from(1000000) to(10000000) scale(-3)or
Finally, we insert the created records using
obj.insertRecords(true). The parameter true means that it is all or nothing, so if any error happens, no records will be inserted. The framework has many cool features:
- Creates records for standard or custom objects, for any standard or custom field.
- Automatically defines required fields.
- Can create data for fields of every data type: Integer, Currency, Double, Date, Datetime, Time, Boolean, String, TextArea, Percent, Reference, Email, Phone, URL, Base64, Picklist and MultiPicklist.
- Handles record types and field dependencies (dependent picklists).
- Supports record groups for inserting and deleting records.
- Validates the definitions based on the field data type.
- Can be used for in test methods or for populating Salesforce orgs with sample data for demos and User Acceptance Testing (UAT).
- Has an extended error messaging system.
Write your own scripts
Now you know what is a Forceea script, let’s see how you can write the scripts for your specific needs. To do this, use the following template:
FObject obj = new FObject('SObject_API_Name', Number_of_records); FObject.seed = 1; obj.insertRecords(true);
where are one or more Dadela field definitions, like the previous definitions we used to create the script for
Opportunity records. The
seed is very important when you want to create the same random records every time. For example, when you populate a Scratch org with sample data, we may want each developer to have the same (but random) set of records. Forceea uses its own engine to create random data (generally called Pseudo-Random Number Generator,PRNG), which you can control. Now, let’s suppose you want to populate your org with
Opportunity records. This means that first you must create records for accounts and then for opportunities (an opportunity is related to an account, that’s why we insert accounts first).
Open your favourite text editor (I use VSCode for that) and create a script using the above template. Your script may look like:
FObject obj = new FObject('Account', 100); FObject.seed = 1; obj.setDefinition('RecordTypeId', 'static value(BigAccount)'); obj.setDefinition('Name', 'static value("Company ")'); obj.setDefinition('Name', 'serial type(number) from(100) step(1) scale(0)'); obj.setDefinition('NumberOfEmployees', 'random type(number) from(10) to(1000) scale(-1)'); obj.setDefinition('AnnualRevenue', 'random type(number) from(10000000) to(100000000) scale(3)'); obj.setDefinition('Rating', 'random type(picklist) except(Hot)'); obj.setDefinition('Phone', 'random type(phone) format("(30) 210 dD-00-DD")'); obj.setDefinition('Industry', 'random type(picklist)'); obj.setDefinition('Type', 'random type(list) value(Prospect, Customer - Direct, Customer - Channel)'); obj.setDefinition('Site', 'random type(url)'); obj.setDefinition('ShippingStreet', 'random type(street) group(shipping)'); obj.setDefinition('ShippingPostalCode', 'random type(postalcode) group(shipping)'); obj.setDefinition('ShippingCity', 'random type(city) group(shipping)'); obj.setDefinition('ShippingState', 'random type(state) group(shipping)'); obj.setDefinition('ShippingCountry', 'random type(country) group(shipping)'); obj.insertRecords(true);
Even though we don’t have the space here to describe every Dadela definition of the above script, I’d like to mention the first field definition for field RecordTypeId (if you use record types, modify the definition with the API name of your record type instead of BigAccount, otherwise delete this line) and the address definitions
ShippingPostalCode, etc (where you get real addresses from United States). You may think that these definitions are difficult, but most of them are obvious and easy to understand. So, back to our script for the Account SObject, give it the name
Accounts.apex and save it into your preferred folder (let’s call it
Now it’s time to create the
Opportunities.apex file with the script for the
Opportunity SObject. Follow the previous procedure and write a script like the example I gave you above. Keep in mind that Forceea will try to automatically find the required fields and generate a field definition for them but, as a rule of thumb, you should always create your definitions for all required fields.
When you create records, you probably want to repeat this procedure again, and replace the existing set of data with another set with different or the same field values. To do this, you probably want to delete the existing inserted records before you insert the new ones. This is the responsibility of the Record Deletion files. First, we’ll delete the opportunities we created. Follow these steps to configure it: Create a new text file, call it delete-opportunities.apex and save it in the ForceeaScripts folder. Write this script in the file:
String flag = 'xJio9!23';
List records = [SELECT Id FROM Opportunity WHERE Forceea__c = :flag LIMIT 5000];
You’re right! At first sight these commands may look difficult if you are not a developer, but they aren’t really hard to understand if you follow these instructions:
Line 1: You may select your own (random) value, like xJio9!23 – but don’t forget to enclose it in single quotation marks
Line 2: Find a filed you don’t use, which has a Text data type or create your own text field and call it
Forceea__c. Here I use the latter, because I couldn’t find any available (not used) standard field on the
Opportunity SObject. Now go to the opportunities.apex file and add the following line before the command
obj.setDefinition(Forceea__c', 'static value(xJio9!23)');
As you can see, we set the field definition for the field Forceea to be our static value
xJio9!23. Do the same for the
Account SObject, creating the file
delete-accounts.apex with the following commands:
String flag = 'xJio9!23';
List records = [SELECT Id FROM Account WHERE Tradestyle = :flag LIMIT 5000];
In Line 2, I suppose the
TradeStyle text field is not used in your org, so you may use it here. Else, you should create a new field as previously. Go to the
accounts.apex file and add the following line before the command
obj.setDefinition('TradeStyle', 'static value(xJio9!23)');
Be careful! The above scripts will delete up to 5,000 records, so if you have more records you have 2 options:
LIMIT 5000up to 10000 (e.g.
- Execute the
delete-accounts.apexagain (you may use it as many times as you want)
That’s it! Now you have 4 files into your ForceeaScript folder:
For your convenience, I have created these files in a zipped file, which you can download from http://bit.ly/ForceeaWithCLI. You may use these files for your training. I suppose you should modify them if you want to use them in a production system (with specific requirements for the field values), but you’ll probably need no modifications if you execute them in an out-of-the-box Developer/Scratch org.
Step 5: Execute your scripts
The last step is to execute the scripts and insert the created records. Create a new text file, call it execute-scripts.bat and save it in the ForceeaScripts folder (I included it in the above zipped file). In this file you’re going to insert the CLI commands which execute the *.apex files you created previously. If you use Windows, your
execute-scripts.bat file will look like:
sfdx force:apex:execute -f .\delete-opportunities.apex -u OrgAlias sfdx force:apex:execute -f .\delete-accounts.apex -u OrgAlias sfdx force:apex:execute -f .\accounts.apex -u OrgAlias sfdx force:apex:execute -f .\opportunities.apex -u OrgAlias
orgAlias is the alias for your org you defined in Step 2. If you’re using a Mac, each command may look like:
sfdx force:apex:execute -f /Users/Username/Documents/ForceeaScripts/accounts.apex -u OrgAlias
When you write your Forceea scripts (e.g. your script in the
accounts.apexfile), you may have errors to correct. For example, you may have misspelled a field’s API name or your Dadela definition may have a syntax error (a very common source of errors is the effect of the Validation Rules and Triggers). Fortunately, the framework has an extensive debug log, with detailed error messages (see the User Guide, pages 44 – 50). You can activate these debug logs, if you insert the command
obj.setVerbose('debug') after the first command of your accounts.apex or opportunities.apex script files. I recommend you initially execute your script files one by one. If you already have inserted records, first execute the two delete-object files. Copy the “delete” commands from your
execute-scripts.bat to your Command Prompt window and execute them. Then verify that records have been deleted successfully. Copy the “insert” commands from your
execute-scripts.bat file to your Command Prompt window and execute them one by one, verifying that records have been inserted successfully. When you have verified that everything works as expected, you may just execute your batch file in the Command Prompt window:
$ execute-scripts.bat (Window users)
If you are a Mac user, you could use a similar batch execution or just simply copy all commands of the batch file to the Command Prompt window and execute them at once. Because of this process, all lines of the batch file will be executed sequentially, each on its separate execution context. This is very important, since it will allow each
sfdx force:apex:execute command to be executed on its own Governor Limits.
Optional Step 6: Execute multiple scripts for the same SObject
You may ask: Why create multiple script files for the same SObject? Well, we just mentioned that each script file (*.apex) is executed by the Salesforce CLI having its own limits. There are a lot of limits, but when you insert records you’re going to hate a limit called “Maximum CPU time on the Salesforce servers”, which is 10,000 ms (that is 10 seconds). In practise this limit may not allow you to insert more than 200 records in a complex implementation (with triggers, many validation rules and so on) or even no more than 50 records! So, let’s suppose that you try to insert 2,000 opportunities but the insertion fails because of this limit. What is the process you should follow?
- Try to execute the script file
sfdx force:apex:execute -f .\opportunities.apex -u OrgAliasusing 100 records, i.e. FObject(‘Opportunity’, 100).
- If your execution is successful, double the records (200), if not set the number of records to half (50).
- Follow the same logic, increasing or decreasing the number of records, to find an optimal maximum value. Take into consideration that Salesforce doesn’t always need the same time to execute your script, so it’s better to set a value less than the absolute maximum.
For example, suppose that you find you can insert up to 250 records. It’s safer to decrease this by 10% and set 225 records.
- Because you want to insert 2,000 records, but each script file will insert 225 records, you need to create 9 script files. The first 8 files will insert 225 records each and the last one will insert 200 records (225 * 8 + 200 = 2,000 records).
- The second line of each script file contains the seed number (
FObject.seed = …). Here we have something new: we’re going to use different seed numbers for the same SObject. You may use whatever numbers you want or something like 1,2,3, etc. So, the first file will have
FObject.seed = 1, the second
FObject.seed = 2, etc. Why do we set different seed values? If we don’t, Forceea will create the same (but random) values in each execution for this SObject (same Close dates, same Amounts, etc), something we don’t want at all! Of course, you may omit the seed command if you don’t want to have the same values whenever you execute your scripts.
- Another important note is this: if you use seed numbers you should always delete the previously created records, unless the same seed number is never used again. For example, if you insert the 2,000 records using seeds from 1 to 9, if you insert new records using a seed between 1 and 9, these new records will be the same as some already created records (something BAD). So, you must use a new seed number (e.g. 10) or delete the records you inserted before inserting new ones.
- Each script file may have the same or different field definitions. It’s up to you to decide what kind of data you want.
- And a last tip: if any of your definitions uses the
serial type(number) …in the
Opportunity.apex), first insert the command
obj.createRecords(numberOfNextrecord);before the final line
numberOfNextrecordis the number of the next record to be inserted. For example, in the first script file it will be
createRecords(1), in the second
createRecords(101), in the third
createRecords(201), etc – under the assumption that you insert 100 records in each script file. If you follow this tip, all inserted records will have a continuous serial number!
Congratulations! You finally managed to reach at the end of this step-by-step guide. I hope I convinced you that Forceea with Salesforce CLI will make your life much easier. After you create the set of your script files, you can automate the creation of all your SObjects using a unique batch file. CLI will execute your batch files line by line, creating and inserting your records, with each execution with new Limits (which is fantastic!!)
This article was published on Nerd@Work blog of Enrico Murru